Description
For CAN AM OUTLANDER/ RENEGADE/ COMMANDER BELT REMOVAL TOOL.
A MUST HAVE FOR BELT/TRANSMISSION SERVICE.
Installation:
THIS BOLT WINDS CLOCKWISE INTO THE ONLY THREADED INSERT ON THE SECONDARY/DRIVEN CLUTCH TO SPREAD APART THE SHEAVES WHILE COMPRESSING THE SPRING FOR EASE OF BELT REMOVAL,
THEN JUST WIND OUT COUNTER CLOCKWISE AFTER BELT IS RE-INSTALLED AS YOU TURN THE SECONDARY/DRIVEN CLUTCH CLOCKWISE FOR INSTALLATION OF THE BELT.
BE SURE TO KEEP BELT IN THE CORRECT ROTATION DIRECTION ( IT WILL BE MARKED).
These 80mm bolts are the Longer length (Opens Clutch COMPLETELY but WILL ALLOW OVER THREAD in and Over Stress Clutch Springs).
Make sure this fits by entering your model number.
Features: 12.9 CL , Pre oil , Fully threaded
Size: M8x1.25×80 Bolt
Used to open the secondary clutch for many Can-am ATV’s & SXS’s
Will not work with the factory X3 spreader they use a larger bolt.
These 80mm bolts are the Longer length (Opens Clutch COMPLETELY but WILL ALLOW OVER THREAD in and Over Stress Clutch Springs).
