Description
This assembly comes with a TEAM Tied secondary Take hold of, Tied secondary helix and Tied secondary spring calibrated to work with the factory components in the main Take hold of.
Replaces the following Polaris part numbers:
1323060 – 2014 1000 XP RZR
1323166 – 2014 1000 XP RZR-4 (Built 4/1/14 and before)
1323239 – 2014 1000 XP RZR-4 (Built 4/2/14 and after)
1323239 – 2015 1000 XP RZR
1323239 – 2015 1000 XP RZR-4
1323071 – 2013 900 XP RZR (Built 4/2/13 and after, does not fit the 2014 model)
1323071 – 2013 900 XP RZR-4 (Built 4/2/13 and after, does not fit the 2014 model)
1323071 – 2013 900 XP Jagged X Edition
Will NOT fit 2016+ models that come factory with the BOSS square slider secondary Take hold of. Refer to ASIN B07SSW3YFL
***SLP belt tool (#20-306) highly advisable to be used with this Take hold of****
Tech Tip: Polaris UTV Clutches will have to be visually inspected each 500 miles. Compressed air will have to be used to clean any dirt and belt dust out of the Take hold of system. Clutches will have to be got rid of from the UTV and serviced each 1000 to 1500 miles depending at the driving conditions encountered.
Make sure this fits by entering your model number.
This assembly comes with a TEAM Tied secondary Take hold of, Tied secondary helix and Tied secondary spring calibrated to work with the factory components in the main Take hold of.
Fitment: 2014-15 RZR XP 1000, 2014-15 RZR-4 XP 1000
Fitment: 2013 RZR XP 900 Jagged X Edition, 2013 RZR XP 900 Built after 4/2/13, 2013 RZR-4 XP 900 Built after 4/2/13 (Is not going to fit 2014 RZR XP 900 models)
Will NOT fit 2016+ models that come factory with the BOSS square slider secondary Take hold of. Refer to ASIN B07SSW3YFL
Take hold of comes assembled, able to bolt on
