Description
Installation Steps
|
|
|
|
|
|---|---|---|---|
|
1.The usage of 13 mm socket remove 2 bolts which is holding top hinge bracket in place. |
2.Place door opener bracket on top of hinge bracket, reinstall bolts and re tighten.And Keep the door closed properly. |
3.Remove screw holding door panel to door frame by The usage of #30 torx bit. |
4.Install door opener door bracket to door with supplied 6 mm -1 x 30 mm screws. Install first screw in hole at longer end of bracket and mount in place of screw. |
6.Then We Can Push bracket up against bottom of door frame and clamp in place temporarily.
7.To install gas strut with rod end down.
8.Check that door closes fully with out bottoming out gas strut. It will have to be minimum of 1/8″ gap on end ball clip and gas strut body. If strut bottoms out lowering the clamped end down will give more clearance.
