Description
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|
| RBM-1300 | RMB-1600 | MIG-210 | TIG-200P | TIG-200DP | |
| Input voltage | 220V | 220V | 220V/110V | 220V | 220V/110V |
| Current range | 30-130A | 30-160A | 30-140A/30-180A | 5-200A | 5-200A/5-150A |
| Duty-cycle | 60% | 60% | 60% | 60% | 60% |
| Welding Wire | Flux Cored Wire(FCAW) | Solid/Flux Cored Wire(FCAW) | Solid/Flux Cored Wire(FCAW) | ||
| Diameter of wire | 030″-.035″（0.8/1.0 mm ） | 030″-.035”（0.8/1.0 mm ） | .030″-.035″（0.8/1.0 mm ） | ||
| Function | MIG/Stick/Lift TIG | MIG/Stick/Lift TIG | MIG/Stick/Lift TIG | TIG/ TIG Pulse/ Stick | TIG/ TIG Pulse/ Stick |
| Welding thickness | over.030″(0.8mm) | over .030″(0.8mm)- .035″ (1.0mm) | over .030″(0.8mm) | 3/8″ | 3/8″ |
| Welding Material | Carbon Steel/Mild Steel/Other Metal material | Stainless steel/Carbon Steel/Mild Steel/Other Metal material | Stainless steel/Carbon Steel/Mild Steel/Other Metal material | Stainless steel/Carbon Steel/Mild Steel/Other Metal material | Aluminum/Stainless steel/Carbon Steel/Mild Steel/Other Metal material |
| Package Weight | 20.28bl | 26.46bl | 28.2bl | 26.89lb | 26.89lb |
| Dimensions | 415×273×310mm | 535×305×345mm | 540×310×350mm | 440×380×360mm | 440×380×360mm |
Troubleshooting
Why is my MIG-150 Welder not welding correctly?
1. Wire-feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?
2. Wire choice: Are you using .035” wire? We recommend .025-0.30″ for best performance.
3. Stick out: Is your stick out too long? Your stick out should be no more than ½”.
4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.
5. Proper grounding: The ground should not be attached to painted or coated metal.
Efficient: 85%
Wire feeder: Inside
Power factor cosφ 0.93
Welding thickness: ≥0.8 mm
Diameter of wire: 0.8/1.0mm
Dimensions :535×305×345MM
Weight :12KG
MIG/MMA/ARC 2 in 1 WELDING MACHINE
Input power voltage: AC 220±15%
Rated input power capacity: KVA 4.8
Input current : 19A for mig,23A for MMA
Rated output current :160
Duty-cycle :85 %
Output current range :30-160 A
Output voltage range :15-22V
Insulation class: F
Protection class: IP21S
|
|
|
|
|
|---|---|---|---|
|
Use a metal brush or grinder and clean down to bare metal before striking an arc. |
A fillet weld, shown here, is one of the most common types of welds. In the flat position, keep the gun angled at 45 degrees from each piece. |
Whether you weld vertical up or down will depend on the application and the thickness of the material you are welding. |
You’ll want to direct more heat into the bottom piece of metal when welding a lap joint. A 60 to 70 degree angle is usually best. |
We will take each and every action to prevent you from bearing any loss at Amazon as we value our customer’s investment and trust more than anything else.
Make sure this fits by entering your model number.
🛒Updated MIG150 110V 220V goes with 1kg flux cored wire most perfectly to do the Steel welding without gas.【30A breaker suggested for 220V, 50A breaker suggested for 110V】
🛒Using gas with 1kg solid welding wires .025″-.030″（0.6/0.8 mm ）to weld over .030″(0.8mm)Thickness workpiece.
🛒MIG/Stick,Gas/Gasless Welding all are available,MMA welding(3.2mm Rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
🛒Package Case 10.3kg (22.7bl)Including : 1X Mig welder Dual Mig150/ 1X Earth clamp/1X electrode holder/ 1X Mig welding torch/1X Flux cored wire 1kg/ 1X Welding hose/1X 20mm Conversion Line
🛒Multi Use:welding stainless steel,mild Steel,other metal material.Buy with 3 Years Warranty.
