Description
This MCSADVENTURES turn signal kit is specifically designed for Polaris General with the 4 pin bed to chassis plug. Will also fit many 2019+ Ranger 1000 non ride command with 4 pin plug.
Note: only fits units with the 4 pin tail light harness plug on top of the rear frame under the bed as shown in picture. This is the harness that comes together from left/right tail lights and is under the bed near the center of the machine….NOT at the actual tail light plugs. Please check your unit to confirm fitment.
To verify fitment on Ranger and General models, lift bed to examine top rear driver side frame area for this 4 pin plug. May not fit Rangers with ride command.
The rear T harness simply plugs into your factory 4 pin tail light harness utilizing the rear brake lights as turn signals.
A heavy duty metal body column mounted switch was chosen for its durability and ease of use. Switch has hazard feature as well as a horn button on the end.
A loud deep throaty automotive style horn is included.
A green LED indicator is wired into the switch harness and easily mounts into a 3/4″ hole within view of the driver. This will illuminate and flash with the corresponding signal selected.
The switch is customized and prepared with plug and play connectors ready to install onto the machine. No adding additional wires or splicing. It simply plugs together.
Front turn signals mount into a 3/4″ diameter hole (2 per side) and harness easily feeds through the firewall where it plugs into the switch harness.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect them
For added convenience, a power harness is also included which plugs into the Polaris Pulse bar on many 2019+ machines.
This is a complete well thought out kit fully tested and ready to install. Easy step by step instructions are included. Installs in most machines in less than an hour.
Make sure this fits by entering your model number.
**VERIFY 4 PIN bed-to-chassis plug for fitment**
Plugs into factory 4 pin tail light harness to utilize brake lights for rear signals
Extended harness fits 2 and 4 seat units
Includes pigtail for license plate light & power plug for Polaris Pulse bar
Heavy duty lever switch with hazard, horn and indicators
