Description
Condition: 100% new
Surface Finish: Black Anodized
Material: Billet Aluminum
Size: As picture shows
Placement on Vehicle: Front and Rear Doors
Item included:
2 x Door Openers
1 x Mounting Hardware
Compatible With: fit for Can-Am Ma-ve-Rick X3 and X3 Max 2017-2020
Note:
1) All dimensions are measured by hand, there could also be small deviations.
2) Color may vary rather as a result of the color setting of each and every individual monitor.
3) Do not fit Can-am With Door Bags！
Installation Steps :
1) The usage of 13 mm socket Do away with 2 bolts which is holding top hinge bracket in place
2) Place door opener bracket on top of hinge bracket, reinstall bolts and re tighten.And Keep the door closed properly
3) Do away with screw holding door panel to door frame by The usage of #30 torx bit
4)Install door opener door bracket to door with supplied 6 mm -1 x 30 mm screws. Install first screw in hole at longer end of bracket and mount instead of screw
5) About other end of bracket, Drill hole in door frame with 1/4 drill and protected other end of bracket with 6 mm -1 x 25 mm screw and nut supplied, uses #30 torx and 10 mm open-end wrench
6) Then We Can Push bracket up against bottom of door frame and clamp in place temporaril
7) To install gas strut with rod end down
8) Check that door closes fully with out bottoming out gas strut. It will have to be minimum of 1/8″gap on end ball clip and gas strut body. If strut bottoms out lowering the clamped end down will give more clearance
Make sure this fits by entering your model number.
Made of Billet Aluminum with black anodized surface finish
Works on Front and Rear Doors
Fit For Can am Maverick X3 2017-2020 With Doors
Do not fit Can-am With Door Bags！
It is a great idea to upgrade your UTV
