Description
Baileigh manually operated rotary draw tube bender. It is perfect for the industrial fabricator that needs to bend lower production runs with very professional looking bends. It is constructed of steel plate. It is assembled with only the handle and stand needing to be attached. It was made to accept hundreds of round and square tubing die sets as well as round pipe dies sets. It is capable of bending up to 1-3/4-inches outside diameter tubing with a maximum wall thickness of 0.095-inches and 1-inches schedule 40 pipe. The manual tubing bender uses a large diameter indexing plate that allows the operator to bend up to 206 degrees (180 degrees plus spring back) without having to re-index and re-pin common on most other manual tube benders on the market. A tension spring back mechanism holds the position as the bend mechanism grabs the next tooth on the index wheel. The ratcheting bend system can be shut off and the handle can be put into a manual override housing that allows the operator to simply walk around the manual bender and bend without the power of the indexing unit. It includes the stand, degree dial, and handle. A large degree scale displays your bend angle and all the tooling has a start of bend indicator line so complex bends can be made with ease. A quick release counter die system allows for quick loading and unloading of the material. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1-inches; mild steel pipe schedule 40: 1-inches; mild steel round tube wall: 1.75-inches (0.083); mild steel square tube (wall): 1-inches (0.125); stainless steel pipe schedule 40: 0.75-inches; stainless steel round tube wall: 1.5-inches (0.083); chromalloy round tube wall: 1.5-inches (0.083); aluminum round tube wall: 2-inches (0.125); maximum center line radius Clr: 10.5-inches; Power: manual.
Make sure this fits by entering your model number.
Manually operated
Drop on tooling
Two speeds
Stand and handle included
Ratcheting design
