Antra True Color Light Resting Shade 3/5-13, DP3 Digital Solar Power Auto Darkening Welding Helmet, Low Profile Grind Button, for TIG, MIG/MAG, MMA, Plasma, 6+1 Extra Lens Covers

True Color Lens with 4 corner-spread sensors

Clearer welding puddles and pools, more sensitive and flexible sensor arrays

• Resting shade 3 is much brighter than shade 4, clearer view before striking an arc.
• True color lens (Optical Class 1/1/1/2) provides natural color and clear viewing, helps to lay solid beads.
• More covered area than 2-sensor or in-line 4 sensor design.
• Quicker response time and more flexible when used in applications with partially blocked view.

One helmet , more than one processes

Versatility is another great asset of DP3 along with its reliable performance

This unit is working on most of ARC related applications including but not limited to:

• Gas Tungsten Arc Welding (GTAW), sometimes called Tungsten Inert Gas (TIG) welding, DC or AC
• Gas Metal Arc Welding (GMAW), now and again referred to by its subtypes Metal Inert Gas (MIG) Welding or Metal Active Gas (MAG) welding
• Flux-cored Arc Welding (FCAW or FCA)
• Shielded Metal Arc Welding (SMAW), sometimes called Manual Metal Arc welding (MMA or MMAW), flux shielded arc welding (stick welding)
• Plasma Cutting
• Grinding

(Note: Different settings may be required for each application.)

Antra’s Interference Suppression Technologies enables DP3/AH6-330-6325 to:

• Detect and response consistently on DC welding arc as little as 2 Amps
• Minimize false triggering in industrial Metal-halide lights, on higher sensitivity setting if not facing lights directly
• Minimize false triggering in sun lights, on higher sensitivity if not facing sun directly

Simplified digital interface for easy operating

The Microchip helps to memorize all settings until next setup or the end of the battery life

• Grinding Mode: lens will stay on shade 3 for 30 minutes on each activation. Quick Grind / Weld switching button offers great convenience for Grind and weld, and previous memorized shade will be set when changing from Grind to Weld. This is super convenient when switching between preparation and welding.
• Shade Adjustment: Use “+” or “-” to increase or decrease shade numbers; press and hold “+” or “-” to choose shade range: 5-8 or 9-13
• Delay Keep an eye on: Dark to Clear Delay, 1-9 settings to avoid glow flashes from the hot bead.
• Sensitivity Keep an eye on: Controls how sensitive the sensors are responding to welding arc. Proper setting can avoid false triggering from adjacent arc at the same time as ensures auto darkening when needed.
• Chance of unexpected changes of settings is greatly reduced.