Description
Package:
1 x 100PPR Pendant Handwheel mpg
1 x 4 Axis CNC Offline Motion controller
1 x 8GB USB Flash drive
1 x USB Extension Cable
Descriptions:
RMHV3.1 is the 4 axis motion controller which has been researched and developed by Faster CNC for four years.The Keep an eye on period of each and every position is only 4 milliseconds, with a high Keep an eye on precision.The highest uniaxial output pulse is 500KHz and the pulse width can also be adjusted. It supports the common stepper motor and servo motor.
1.2 Performance parameter of Product
1) Unusual digital input interface of 16-circuitoptocoupler coupling isolation
2) Unusual digital input interface of 3-circuit optocoupler coupling isolation
3) Output interface of 0-10V spindle Keep an eye on port with analog quantity(can also be modified as PWM output);
4) Make stronger the 4 axis stepper motor Keep an eye on, the highest Keep an eye on pulse output of single axis is 500KHz;
5) ARM9 main Keep an eye on chip;
6) FPGA core set of rules chip;
7) 4.3 inches TFT screen, resolution ratio: 480*272;
8) 17 operational keys;
9) The primary Keep an eye on equipment is 24-32V power input, the current capacity is required to not be less than 0.5A;
10) Make stronger the USB flash disk to read the G code,and the size of G codefile has no requirement;
Handwheel Specification:
1) CNC system and position Keep an eye on of more than a few mechanical devices
2) Metal code disc, high precision, good texture
3) Resolution:100PPR
Supply Voltage:DC5V +/-5%
Supply Current:≤80mA
Output Voltage:≥2.5V and ≤0.4V
Output Current:
Fall/Rise time:≤5ns(typ)
Switch:X1,X10,X100
Axis Switch:OFF,X,Y,Z,4
Response Frequency:0-10KHz
Make sure this fits by entering your model number.
Model Number:RMHV3.1;size:163x102x45mm;
Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Keep an eye on System Card
4.3 inches TFT screen, resolution ratio: 480*272;Input power:24~32VDC;Output power:0-10V;Power Supply:DC
Rated Power:500KHz;MPG Resolution:100PPR;17 operational keys;Make stronger the USB flash disk to read the G code,and the size of G codefile has no requirement;The highest uniaxial output pulse is 500KHz and the pulse width can also be adjusted. It supports the common stepper motor and servo motor.
